LW452 2-Way Dimmer (2 Gang)

RRP £74.99 (inc. VAT)

The LightwaveRF LW452 2-Way, 2 Gang Dimmer is designed to operate alongside a standard LightwaveRF Dimmer on a 2-Way circuit (only one standard dimmer can be used on any circuit). Up to six gangs can be used on one circuit in place of intermediate switches in a ‘daisy chain’ or from the same master. It is available in stainless steel, white, chrome and black chrome finishes. The Dimmer utilises existing wiring and back boxes (35mm minimum recommended) allowing for quick and easy installation. It must be used alongside a standard LightwaveRF dimmer and cannot be used alongside a normal light switch.

Buy Now Specification

Easy Install

Installing LightwaveRF dimmers is quick and easy, and no alterations to the building fabric, special tools or training are required. No extra cabling is necessary and the dimmers fit standard 35mm back-boxes. Each retrofit module is legal to DIY install in your own home, and all our dimmers are tested to meet the highest safety standards.

Download the manual

Download the Spec Sheet

Specification LW452

Description: 2 Gang, 2-Way Dimmer
Finishes: White (WH) / Steel (SS) / Chrome (C) / Black Chrome (BLK)
Voltage: 230V
Radio Frequency: 433.9MHz
RX (Receiver): Y
Dimmable LED: Y
Incandescent/Halogen: Y
Maximum Controllers: 6
Dimensions(mm): 88x88x30
Weight: 145g