GETTING STARTED

Start here if you are new to lightwave. This page explains everything that you need to know to get going.

Free download

The free smartphone and tablet App can be downloaded from the App store or Google Play. You can also use the WEB APP on a PC or tablet by logging into the LightwaveRF website at any time.

One home one app

The App provides control for up to 80 heating and monitoring devices, as well as up to 256 other LightwaveRF lighting and power modules. Basic app features include grouping, scene lighting, energy monitoring, heating scheduling, temperature reporting, scheduled events and socket or dimmer locking.

The key to the system

The ‘Lightwave Link’ is the key to the system. It receives and passes on commands from the App to Lightwave modules such as dimmers, relays or sockets which then carry out the command. The App can communicate with the Link within the home using WiFi, or using 3 or 4G if it detects that you are away.

Plug & play

The Link is a plug & play device; all it requires is to be plugged into your home broadband WiFi router. Any amount of data received and transmitted from the link is tiny, so you don’t have to worry about it affecting your network speed. One Link will cover a typical large house, but if necessary you can add more Lightwave Links to extend the range in larger buildings. Take a look at our commercial section for information on how Lightwave can be adapted for larger installs.

Lightwave ‘modules’ are simply attractive looking light switches, power sockets, radiator valves, etc. with the Lightwave technology built in.

Self contained

Each module is self contained, and you can add or remove modules at any time without disrupting your setup. This makes installing LightwaveRF in the home very simple. No complex planning or alterations to the building fabric is needed, and no special installation training is necessary; many modules are plug and play, and wired units only require an installer to have a part p qualification to wire them.

Standard wiring & back boxes

Lightwave dimmers and sockets use standard 35mm back-boxes, and no extra cabling is required.